Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › AIR PUMP
RM2660E _51 Engine / Hybrid System _052784 1GR-FE EMISSION CONTROL _0255129 AIR PUMP G

1GR-FE EMISSION CONTROL  AIR PUMP  INSPECTION  


PROCEDURE

Hide 17610C 1.INSPECT AIR PUMP ASSEMBLY

a.

Check the heater resistance.

i.
A226958E01
0.08,0.032 0.268,0.204 0.188,0.172 10 *a 2.49,0.474 2.910,0.644 0.420,0.170 10 APH+ 2.448,0.554 2.327,0.554 2.327,0.554 2.001,0.786 false 2.462,1.66 2.353,1.66 2.353,1.66 2.018,1.497 false 2.49,1.57 2.948,1.739 0.458,0.170 10 APHG

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (APH+) - 3 (APHG) -20°C (-4°F) 3.6 to 17.6 Ω
-10°C (14°F) 3.4 to 16.5 Ω
0°C (32°F) 3.1 to 15.4 Ω
10°C (50°F) 2.8 to 14.3 Ω
20°C (68°F) 2.7 to 13.2 Ω


Text in Illustration
*a Component without harness connected
(Air Pump)

If the result is not as specified, replace the air pump assembly.