Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › AIR SWITCHING VALVE (for Bank 1)
RM2660E _51 Engine / Hybrid System _052784 1GR-FE EMISSION CONTROL _0255130 AIR SWITCHING VALVE(for Bank 1) G

1GR-FE EMISSION CONTROL  AIR SWITCHING VALVE(for Bank 1)  INSPECTION  


PROCEDURE

Hide 25701B 1.INSPECT NO. 1 EMISSION CONTROL VALVE SET

a.
A224402E02
0.24,0.389 0.433,0.573 0.193,0.184 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 5 20°C (68°F) 4.5 to 5.5 Ω
1 - Body ground Always 1 MΩ or higher
5 - Body ground


Text in Illustration
*a Component without harness connected
(No. 1 Emission Control Valve Set)

HINT:
·

When measuring the resistance, do not touch terminals 2, 3 or 4.

·

When measuring the resistance, make sure that the surface temperature of the No. 1 emission control valve set is 20°C (68°F).



If the result is not as specified, replace the No. 1 emission control valve set.


b.
A224403E02
0.962,2.916 1.136,3.072 0.174,0.156 10 *2 2.8,1.238 2.974,1.398 0.174,0.161 10 *1 2.77,1.331 2.665,1.331 2.665,1.331 2.44,1.672 false 1.073,2.401 1.073,2.898 false

Check the operation of the No. 1 emission control valve set.

i.

Check that air does not flow from port A to port B.

Text in Illustration
*1 Port A
*2 Port B
V100135

Air

NOTICE:

Make sure the applied pressure is 30 kPa (0.3 kgf/cm2, 4.4 psi) or less.


If the result is not as specified, replace the No. 1 emission control valve set.


ii.
A224404E02
2.627,2.81 2.797,2.973 0.170,0.163 10 *1 1.446,4.328 1.616,4.491 0.170,0.163 10 *2 2.616,2.899 2.51,2.899 2.51,2.899 2.353,3.232 false 1.419,4.417 1.328,4.417 1.328,4.417 1.041,3.93 false 0.227,0.074 0.397,0.237 0.170,0.163 10 *a

Apply battery voltage across terminals 1 and 5.

NOTICE:

When applying voltage, do not touch terminals 2, 3 or 4.



iii.

Check that air flows from port A to port B.

Text in Illustration
*1 Port A
*2 Port B
*a Component without harness connected
(No. 1 Emission Control Valve Set)
V100135

Air

If the result is not as specified, replace the No. 1 emission control valve set.