Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › CANISTER(w/ Secondary Air Injection System) › from 2015.08
RM2660E _51 Engine / Hybrid System _052784 1GR-FE EMISSION CONTROL _0255133 CANISTER(w/ Secondary Air Injection System) A

1GR-FE EMISSION CONTROL  CANISTER(w/ Secondary Air Injection System)  REMOVAL  


PROCEDURE

Hide 77740 1.REMOVE CANISTER

a.
A177605

Slide the clamp and disconnect the air inlet line hose.


b.
A177606

Slide the 2 clamps and disconnect the vent line hose and purge line hose.


c.
A177607

Remove the 3 bolts and charcoal canister assembly.


d.

disconnect the hose and remove the 2 fuel hose clamps from the charcoal canister assembly.

A373137E01
5.212,2.384 5.367,2.566 0.156,0.181 10 *1 4.806,2.17 4.864,2.473 4.864,2.473 5.165,2.473 false 4.996,2.197 5.051,2.473 false 1.456,0.345 1.612,0.526 0.156,0.181 10 *3 1.844,0.053 2.000,0.235 0.156,0.181 10 *2 1.924,0.723 1.834,0.421 1.834,0.421 1.638,0.421 false 2.352,0.586 2.218,0.136 2.218,0.136 2.022,0.136 false

Text in Illustration
*1 Fuel Hose Clamp *2 Purge Line Hose
*3 Vent line hose - -


e.

Slide the clamp and remove the purge line hose from the charcoal canister assembly.


f.

Slide the clamp and remove the vent line hose from the charcoal canister assembly.