Home › Engine / Hybrid System › 1UR-FE (EMISSION CONTROL) › AIR SWITCHING VALVE (for Bank 2)
RM2660E _51 Engine / Hybrid System _052785 1UR-FE EMISSION CONTROL _0255138 AIR SWITCHING VALVE(for Bank 2) G

1UR-FE EMISSION CONTROL  AIR SWITCHING VALVE(for Bank 2)  INSPECTION  


PROCEDURE

Hide 25710 1.INSPECT AIR SWITCHING VALVE ASSEMBLY

a.
A266194E03
0.188,0.24 0.385,0.417 0.198,0.177 10 false *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 5 20°C (68°F) 4.5 to 5.5 Ω
1 - Body ground Always 1 MΩ or higher
5 - Body ground


Text in Illustration
*a Component without harness connected
(Air Switching Valve)

NOTICE:

When measuring the resistance, do not touch terminals 2, 3 or 4.


HINT:

When measuring the resistance, make sure that the surface temperature of the air switching valve assembly is 20°C (68°F).


If the result is not as specified, replace the air switching valve assembly.


b.
A266195E04
1.76,0.25 1.979,0.25 1.979,0.25 2.167,1.115 false 1.292,3.167 1.104,3.167 1.104,3.167 1.021,2.719 false 1.573,0.167 1.75,0.344 0.177,0.177 10 false *1 1.323,3.083 1.5,3.26 0.177,0.177 10 false *2

Check the operation of the air switching valve.

i.

Check that air does not flow from port A to port B.

Text in Illustration
*1 Port A
*2 Port B
V100135

Air

NOTICE:

Make sure the applied pressure is 30 kPa (0.3 kgf/cm2, 4.4 psi) or less.


If the result is not as specified, replace the air switching valve assembly.


ii.
A266196E01
0.184,0.224 0.374,0.403 0.191,0.179 10 *a 1.639,1.826 1.807,2.007 0.167,0.181 10 *1 1.83,1.91 2.028,1.91 2.028,1.91 2.283,2.646 false 0.17,3.352 0.356,3.531 0.186,0.179 10 *2 0.384,3.44 0.527,3.44 0.527,3.44 0.679,3.738 false

Apply battery voltage across terminals 1 and 5.

Text in Illustration
*1 Port A
*2 Port B
*a Component without harness connected
(Air Switching Valve)
V100135

Air

NOTICE:

When applying voltage, do not touch terminals 2, 3 or 4.



iii.

Check that air flows from port A to port B.

If the result is not as specified, replace the air switching valve assembly.