Home › Engine / Hybrid System › 1UR-FE (EMISSION CONTROL) › CANISTER(w/o Secondary Air Injection System) › from 2015.08
RM2660E _51 Engine / Hybrid System _052785 1UR-FE EMISSION CONTROL _0255146 CANISTER(w/o Secondary Air Injection System) A

1UR-FE EMISSION CONTROL  CANISTER(w/o Secondary Air Injection System)  INSTALLATION  


PROCEDURE

Hide 77740 1.INSTALL CHARCOAL CANISTER ASSEMBLY

a.

Install the 2 fuel hose clamps to the charcoal canister assembly.

A373135E01
1.272,2.526 2.326,3.593 1.054,1.067 1.332,2.554 1.488,2.736 0.156,0.181 10 *a 1.892,3.125 1.714,3.382 1.714,3.382 1.581,3.382 false 1.407,3.317 1.563,3.498 0.156,0.181 10 *2 2.007,1.875 1.829,2.132 1.829,2.132 1.696,2.132 false 1.521,2.067 1.677,2.248 0.156,0.181 10 *2 2.826,1.525 2.338,0.916 2.338,0.916 2.17,0.916 false 2.004,0.84 2.160,1.021 0.156,0.181 10 *1 3.131,0.919 2.642,0.31 2.642,0.31 2.474,0.31 false 2.284,0.241 2.440,0.422 0.156,0.181 10 *4 4.644,0.061 4.800,0.242 0.156,0.181 10 *5 4.112,0.995 4.442,0.153 4.442,0.153 4.61,0.153 false 5.238,0.868 5.386,0.49 5.386,0.49 5.554,0.49 false 5.592,0.394 5.748,0.575 0.156,0.181 10 *3 4.447,1.776 4.541,1.534 4.541,1.534 4.989,1.534 false 4.668,1.878 4.803,1.534 false 5.032,1.448 5.188,1.630 0.156,0.181 10 *6

Text in Illustration
*1 Purge Line Hose *2 Vent Line Hose
*3 Fuel Emission Hose A *4 Fuel Emission Hose B
*5 Fuel Emission Hose Sub-assembly *6 Fuel Hose Clamp
*a for GCC Countries - -


b.

Install the fuel emission hose sub-assembly to the charcoal canister assembly, and slide the clamp to secure the hose.


c.

Install the fuel emission hose B to the charcoal canister assembly and fuel emission hose sub-assembly, and slide the 2 clamp to secure the hose.


d.

Install the fuel emission hose A to the fuel emission hose sub-assembly, and slide the clamp to secure the hose.


e.

Connect the fuel emission hose A to the 2 fuel hose clamps.


f.

Install the vent line hose to the charcoal canister assembly, and slide the clamp to secure the hose.


g.

Install the purge line hose to the charcoal canister assembly, and slide the clamp to secure the hose.


h.

Install the charcoal canister assembly with the 3 bolts.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


i.

Connect the vent line hose and purge line hose to the 2 fuel emission tube, and slide the 2 clamps to secure the hoses.


j.

Connect the fuel emission hose to the fuel emission tube, and slide the clamp to secure the hose.


Hide 77100U 2.INSTALL FUEL TANK SUB-ASSEMBLY (w/ Active Height Control)