Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EGR VALVE
RM2660E _51 Engine / Hybrid System _052786 1VD-FTV EMISSION CONTROL _0255148 EGR VALVE G

1VD-FTV EMISSION CONTROL  EGR VALVE  INSPECTION  


PROCEDURE

Hide 25620 1.INSPECT EGR VALVE ASSEMBLY

a.
A165499E04
0.085,0.019 2.609,0.404 2.524,0.385 10 Component without harness connected: (No. 1 and No. 2 EGR Valves) 0.188,2.717 0.548,2.908 0.361,0.191 10 EGR 1.601,2.717 1.861,2.908 0.260,0.191 10 VC 2.839,2.717 3.078,2.908 0.239,0.191 10 +B 2.199,2.717 2.427,2.908 0.229,0.191 10 E2 1.743,2.64 1.743,2.055 false 1.081,2.039 0.377,2.528 0.377,2.528 0.377,2.64 false 2.061,2.039 2.328,2.528 2.328,2.528 2.328,2.64 false 2.483,2.039 2.946,2.528 2.946,2.528 2.946,2.64 false

Check the EGR valve position sensor.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+B) - 5 (EGR) 20°C (68°F) 6.5 to 7.5 Ω
3 (VC) - 2 (E2) Always 2.45 to 4.55 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the EGR valve assembly.


If the result is not as specified, replace the EGR valve assembly.