Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR(for DPF)
RM2660E _51 Engine / Hybrid System _052786 1VD-FTV EMISSION CONTROL _0255152 DIFFERENTIAL PRESSURE SENSOR(for DPF) A

1VD-FTV EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR(for DPF)  REMOVAL  


PROCEDURE

Hide 89481B 1.REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

a.

for Bank 1:

i.
A271239

Disconnect the differential pressure sensor connector.


ii.

Disconnect the No. 1 air hose and No. 2 air hose.


iii.

Remove the bolt and sensor bracket.


iv.

Remove the bolt and differential pressure sensor from the sensor bracket.



b.

for Bank 2:


ii.
A271251

Detach the 4 wire harness clamps.


iii.

Disconnect the differential pressure sensor connector and detach the wire harness clamp.


iv.
A271240

Disconnect the No. 3 air hose and No. 4 air hose.


v.

Remove the bolt and sensor bracket.


vi.

Remove the bolt and differential pressure sensor from the sensor bracket.