Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR(for DPF)
RM2660E _51 Engine / Hybrid System _052786 1VD-FTV EMISSION CONTROL _0255154 EXHAUST GAS TEMPERATURE SENSOR(for DPF) G

1VD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for DPF)  INSPECTION  


PROCEDURE

Hide 89425 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 42 to 68 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.


Hide 89425A 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 42 to 68 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.


Hide 89425B 3.INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 42 to 68 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.


Hide 89425C 4.INSPECT NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 42 to 68 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the No. 4 exhaust gas temperature sensor.