Home › Engine / Hybrid System › 3UR-FE (EMISSION CONTROL) › CANISTER › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052787 3UR-FE EMISSION CONTROL _0255159 CANISTER A

3UR-FE EMISSION CONTROL  CANISTER  INSTALLATION  


PROCEDURE

Hide 77740 1.INSTALL CANISTER

a.

Install the vent line hose to the charcoal canister assembly, and slide the clamp to secure the hose.


b.

Install the purge line hose to the charcoal canister assembly, and slide the clamp to secure the hose.


c.

Install the 2 fuel hose clamps to the charcoal canister assembly.


d.

Install the charcoal canister assembly with the 3 bolts.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


e.

Connect the vent line hose and purge line hose to the fuel emission tube, and slide the clamp to secure the hose.


f.

Connect the air inlet line hose to the fuel emission tube, and slide the clamp to secure the hose.