Home › Engine / Hybrid System › 1UR-FE (INTAKE / EXHAUST) › EXHAUST PIPE
RM2660E _51 Engine / Hybrid System _052788 1UR-FE INTAKE / EXHAUST _0255160 EXHAUST PIPE A

1UR-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 89465 2.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

Hide 89465 3.REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

Hide 17430 4.REMOVE TAILPIPE ASSEMBLY

a.
A272604

Remove the bolt and exhaust tailpipe clamp.


b.

Remove the 2 exhaust pipe supports, gasket and tailpipe.


Hide 17581A 5.REMOVE EXHAUST PIPE DAMPER

a.
A218620

Remove the 2 bolts, exhaust pipe damper and No. 4 exhaust pipe upper protector from the tailpipe.


Hide 17420 6.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 4 bolts and disconnect the center exhaust pipe.


b.

Remove the 3 exhaust pipe supports, 2 gaskets and center exhaust pipe.


Hide 17450B 7.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

a.
A209554

Remove the 2 nuts and front No. 2 exhaust pipe.


b.

Remove the gasket.


Hide 17410 8.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A209555

Remove the 2 nuts and front exhaust pipe.


b.

Remove the gasket.