Home › Engine / Hybrid System › 3UR-FE (INTAKE / EXHAUST) › EXHAUST PIPE
RM2660E _51 Engine / Hybrid System _052789 3UR-FE INTAKE / EXHAUST _0255169 EXHAUST PIPE A

3UR-FE INTAKE / EXHAUST  EXHAUST PIPE  INSTALLATION  


PROCEDURE

Hide 89465A 1.INSTALL NO. 2 HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

Hide 89465 2.INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

Hide 17410 3.INSTALL FRONT EXHAUST PIPE ASSEMBLY

a.

Install a new gasket and the front exhaust pipe to the exhaust manifold RH with 2 new nuts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)


b.

Install the wire harness clamp bracket of the oxygen sensor to the transmission with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


c.

Connect the heated oxygen sensor connector.


Hide 17450B 4.INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

a.

Install a new gasket and the front No. 2 exhaust pipe to the exhaust manifold LH with 2 new nuts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)


b.

Install the wire harness clamp bracket of the oxygen sensor to the transmission with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


c.

Connect the heated oxygen sensor connector.


Hide 17420 5.INSTALL CENTER EXHAUST PIPE ASSEMBLY

a.

Install 2 new gaskets to the front exhaust pipe and front No. 2 exhaust pipe.


b.

Install the center exhaust pipe to the 3 exhaust pipe supports, and then install the 4 bolts.

Torque:
48 N*m (489 kgf*cm, 35 ft.*lbf)


Hide 17581A 6.INSTALL EXHAUST PIPE DAMPER

a.

Install the exhaust pipe damper to the tailpipe with the 2 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 17430 7.INSTALL TAILPIPE ASSEMBLY

a.

Install the tailpipe to the 2 exhaust pipe supports.


b.

Install a new gasket to the center exhaust pipe.


c.

Connect the tailpipe to the center exhaust pipe.


d.
A240602E02
1.729,3.469 0.854,3.719 0.854,3.719 0.708,3.719 true 0.917,0.146 1.167,0.344 0.25,0.198 10 false *a 0.281,1.063 0.521,1.26 0.24,0.198 10 false *b 0.135,2.802 0.375,3 0.24,0.198 10 false *c 0.5,3.625 0.708,3.813 0.208,0.188 10 false *1 2.635,1.104 2.979,1.302 0.344,0.198 10 false 30°

Attach a new clamp to the tailpipe and center exhaust pipe. Then install the bolt to the clamp.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

Text in Illustration
*1 Gasket
*a Top
*b LH Side
*c Front

HINT:

Install the clamp within the angle range shown in the illustration.



Hide 8.INSPECT FOR EXHAUST GAS LEAK