Home › Engine / Hybrid System › 1VD-FTV (INTAKE / EXHAUST) › EXHAUST PIPE(w/o DPF)
RM2660E _51 Engine / Hybrid System _052790 1VD-FTV INTAKE / EXHAUST _0255176 EXHAUST PIPE(w/o DPF) A

1VD-FTV INTAKE / EXHAUST  EXHAUST PIPE(w/o DPF)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves and protective glasses when removing the exhaust pipe.

·

The exhaust pipe is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe has cooled down before removing it.



PROCEDURE

Hide 53738A 1.REMOVE FRONT FENDER APRON SEAL REAR RH

a.
A177002

Using a clip remover, remove the 4 clips and fender apron seal.


Hide 53739A 2.REMOVE FRONT FENDER APRON SEAL REAR LH

a.
A177005

Using a clip remover, remove the 4 clips and fender apron seal.


Hide 51442 3.REMOVE NO. 2 ENGINE UNDER COVER

a.
C173930

Remove the 6 bolts and under cover.


Hide 17430 4.REMOVE TAILPIPE ASSEMBLY

a.

Remove the bolt, clamp and gasket.


b.

Disconnect the tailpipe from the 2 exhaust pipe supports.


Hide 17420 5.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 4 bolts and 2 compression springs.


b.

Disconnect the center exhaust pipe from the 3 exhaust pipe supports.


c.

Remove the gasket from the front exhaust pipe.


Hide 17410 6.REMOVE FRONT NO. 1 EXHAUST PIPE ASSEMBLY

a.

Remove the 2 nuts and front exhaust pipe.


b.

Remove the gasket.


Hide 17450B 7.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

a.

Remove the 2 nuts, 2 bolts and front exhaust pipe.


b.

Remove the gasket.


Hide 18450A 8.REMOVE MONOLITHIC CONVERTER ASSEMBLY RH (w/ Monolithic Converter)

a.
A174834

Remove the 3 bolts and manifold stay RH.


b.

Remove the 3 nuts and monolithic converter RH.


c.

Remove the gasket from the turbocharger.


Hide 18460 9.REMOVE MONOLITHIC CONVERTER ASSEMBLY LH (w/ Monolithic Converter)

a.
A174833

Remove the 3 bolts and manifold stay LH.


b.

Remove the 3 nuts and monolithic converter LH.


c.

Remove the gasket from the turbocharger.


Hide 17291 10.REMOVE OUTLET TURBINE ELBOW RH (w/o Monolithic Converter)

a.
A174836

Remove the 3 bolts and manifold stay RH.


b.

Remove the 3 nuts and outlet turbine elbow RH.


c.

Remove the gasket from the turbocharger.


Hide 17292 11.REMOVE OUTLET TURBINE ELBOW LH (w/o Monolithic Converter)

a.
A174835

Remove the 3 bolts and manifold stay LH.


b.

Remove the 3 nuts and outlet turbine elbow LH.


c.

Remove the gasket from the turbocharger.