Home › Engine / Hybrid System › 1VD-FTV (COOLING) › THERMOSTAT
RM2660E _51 Engine / Hybrid System _052795 1VD-FTV COOLING _0255199 THERMOSTAT G

1VD-FTV COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 1.INSPECT THERMOSTAT

HINT:
A167079E01
2.62,1.358 2.995,1.538 0.375,0.180 10 76°C

The valve opening temperature is inscribed on the thermostat.


a.
P000436

Immerse the thermostat in water and then gradually heat the water.


b.

Check the valve opening temperature.

Valve opening temperature:

74 to 78°C (165 to 172°F)


If the valve opening temperature is not within the specified range, replace the thermostat.



c.
A167080E01
2.557,1.602 3.196,1.782 0.639,0.180 10 Valve Lift

Check the valve lift.

Valve lift:

10 mm (0.394 in.) or more at 90°C (194°F)


If the valve lift is not as specified, replace the thermostat.



d.

Check that the valve is fully closed when the thermostat is at low temperatures (below 40°C (104°F)).

If not fully closed, replace the thermostat.