Home › Engine / Hybrid System › 1UR-FE (LUBRICATION) › OIL PUMP
RM2660E _51 Engine / Hybrid System _052797 1UR-FE LUBRICATION _0255211 OIL PUMP G

1UR-FE LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 1.INSPECT OIL PUMP RELIEF VALVE

a.
A162535

Coat the relief valve with engine oil.


b.

Check that the relief valve falls smoothly into the valve hole by its own weight.

If the relief valve is not as specified, replace it. If necessary, replace the timing chain cover sub-assembly.


Hide 2.INSPECT OIL PUMP ROTOR SET

a.
A162536E11
1.49,0.354 0.948,0.354 0.948,0.354 1.531,1.063 true 0.729,0.271 0.906,0.458 0.177,0.188 10 true *1

Install the rotors to the timing chain cover with the marks on the rotors facing outward. Check that the rotors revolve smoothly.

Text in Illustration
*1 Mark

If they do not rotate smoothly, replace the timing chain cover sub-assembly.


b.

Check the tip clearance.

i.
A162537

Using a feeler gauge, measure the clearance between the drive and driven rotor tips as shown in the illustration.

Standard tip clearance:

0.180 to 0.300 mm (0.00709 to 0.0118 in.)


Maximum tip clearance:

0.300 mm (0.0118 in.)


If the tip clearance is more than the maximum, replace the oil pump rotor set.



c.

Check the side clearance.

i.
A162538

Using a feeler gauge and steel square, measure the clearance between the rotors and steel square as shown in the illustration.

Standard side clearance:

0.030 to 0.090 mm (0.00118 to 0.00354 in.)


Maximum side clearance:

0.090 mm (0.00354 in.)


If the side clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.



d.

Check the body clearance.

i.
A162539

Using a feeler gauge, measure the clearance between the timing chain cover and driven rotor as shown in the illustration.

Standard body clearance:

0.175 to 0.250 mm (0.00689 to 0.00984 in.)


Maximum body clearance:

0.250 mm (0.00984 in.)


If the body clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.