Home › Engine / Hybrid System › 1UR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052797 1UR-FE LUBRICATION _0255213 OIL LEVEL SENSOR G

1UR-FE LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A170614E09
2.333,0.729 3.094,0.417 3.094,0.417 3.188,0.417 true 2.427,0.875 3.073,1.042 3.073,1.042 3.177,1.042 true 3.229,0.323 3.344,0.49 0.115,0.167 10 false 1 3.229,0.958 3.333,1.115 0.104,0.156 10 false 2 3.083,2.469 3.323,2.635 0.24,0.167 10 false ON 3.042,2.885 3.365,3.063 0.323,0.177 10 false OFF

Partially immerse the engine oil level sensor in an oil bath and warm up the oil bath.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 ON, 20°C (68°F) Below 1 Ω
OFF, 20°C (68°F)
ON, 60°C (140°F)
OFF, 60°C (140°F) 10 kΩ or higher


If the result is not as specified, replace the engine oil level sensor.