Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052798 1GR-FE LUBRICATION _0255219 OIL LEVEL SENSOR G

1GR-FE LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

A184466E01
2.736,0.327 3.232,0.526 0.496,0.199 10 1 (LVL) 2.984,2.347 3.224,2.546 0.240,0.199 10 ON 2.984,2.819 3.285,3.018 0.300,0.199 10 OFF 2.736,0.964 3.091,1.163 0.355,0.199 10 2 (E) 1.831,0.655 2.6,0.42 false 2.6,0.42 2.688,0.42 false 1.939,0.848 2.615,1.053 false 2.615,1.053 2.703,1.053 false

a.

Partially immerse the sensor in an oil bath and warm up the oil bath.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (LVL) - 2 (E) ON, 20°C (68°F) Below 1 Ω
OFF, 20°C (68°F) Below 1 Ω
ON, 60°C (140°F) Below 1 Ω
OFF, 60°C (140°F) 10 kΩ or higher


If the result is not as specified, replace the sensor.