Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › OIL PRESSURE SENSOR
RM2660E _51 Engine / Hybrid System _052799 1VD-FTV LUBRICATION _0255221 OIL PRESSURE SENSOR G

1VD-FTV LUBRICATION  OIL PRESSURE SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83520 1.INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY

a.
A163798E11
1.646,1.063 2.156,1.115 false 1.01,2.042 1.625,2.229 0.615,0.188 10 false Test LED 0.198,0.073 2.719,0.438 2.521,0.365 10 false Component without harness connected: (Oil Pressure Sender Gauge) 2.208,1.031 2.323,1.208 0.115,0.177 10 false 1

Disconnect the oil pressure sender gauge connector.


b.

Apply battery positive (+) voltage to the oil pressure sender gauge terminal through a test LED.


c.

Check that the LED does not illuminate when the engine is stopped.


d.

Check that the oil pressure sender gauge operation.

OK:
Condition Specified Condition
Engine stopped LED does not illuminate
Engine is running Number of flashes varies with engine speed


If the result is not as specified, replace the oil pressure sender gauge assembly.