Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › ENGINE OIL COOLER
RM2660E _51 Engine / Hybrid System _052799 1VD-FTV LUBRICATION _0255226 ENGINE OIL COOLER G

1VD-FTV LUBRICATION  ENGINE OIL COOLER  INSPECTION  


PROCEDURE

Hide 15710 1.INSPECT OIL COOLER ASSEMBLY

a.

Visual check that the oil cooler for damage.

If necessary, replace the oil cooler assembly.


b.
U163123E02
0.469,1.417 1.198,1.573 0.729,0.156 10 false Water Port 0.479,1.802 1.01,1.969 0.531,0.167 10 false Oil Port 0.385,1.406 0.448,1.552 0.063,0.146 10 false : 0.385,1.792 0.448,1.938 0.063,0.146 10 false : 2.563,0.49 2.719,0.656 0.156,0.167 10 false A 2.979,1.531 3.135,1.698 0.156,0.167 10 false B 2.552,1.729 2.708,1.896 0.156,0.167 10 false A 2.813,0.708 2.969,0.885 0.156,0.177 10 false B

Check the oil cooler for clogging.

i.

Apply air into A, and check that air flows from B for the water and oil ports.

If air does not flow as specified, clean or replace the oil cooler assembly.