Home › Engine / Hybrid System › 1GR-FE (STARTING) › RELAY › from 2015.08
RM2660E _51 Engine / Hybrid System _052800 1GR-FE STARTING _0255228 RELAY G

1GR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A302442E01
2.441,1.71 2.572,1.853 0.130,0.143 10 1 3.105,0.995 3.235,1.138 0.130,0.143 10 5 2.583,0.274 2.713,0.418 0.130,0.143 10 2 1.67,0.995 1.800,1.138 0.130,0.143 10 3 2.113,1.078 1.823,1.078 false 2.482,1.406 2.482,1.695 false 3.081,1.078 2.791,1.078 false 2.482,0.751 2.482,0.351 2.482,0.351 2.56,0.351 false 1.3,1.22 1.430,1.363 0.130,0.143 10 2 1.3,0.81 1.430,0.953 0.130,0.143 10 5 0.377,0.793 0.508,0.937 0.130,0.143 10 3 0.377,1.232 0.508,1.375 0.130,0.143 10 1

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.