Home › Engine / Hybrid System › 1VD-FTV (STARTING) › STARTER
RM2660E _51 Engine / Hybrid System _052803 1VD-FTV STARTING _0255243 STARTER A

1VD-FTV STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28213 1.REMOVE STARTER CLUTCH PINION

A163092

a.

Using snap ring pliers, remove the snap ring.

HINT:

While pushing down the starter clutch pinion, remove the snap ring.



b.

Remove the pinion stop collar, starter clutch pinion and starter drive spring.


Hide 28140 2.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A175299

Remove the 2 starter hoses from the starter.


b.
A175300E01
0.115,0.583 0.833,0.748 0.718,0.165 10 Terminal C 1.477,0.666 0.971,0.666 false

Remove the nut from terminal C.


c.

Remove the 2 through bolts and 2 screws, then remove the commutator end frame from the starter yoke.


d.
A163085

Using a screwdriver, hold the starter brush spring back and disconnect the 4 starter brushes from the brush holder.


e.

Remove the starter brush holder from the starter armature.


Hide 28120 3.REMOVE STARTER YOKE ASSEMBLY

a.
A163086

Remove the starter yoke.


b.
A163097

Remove the 2 O-rings from the starter yoke.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.
A175301

Remove the starter armature from the starter plate.


Hide 28256 5.REMOVE STARTER INTERNAL GEAR

a.
A175302

Remove the starter plate.


b.
A175303

Remove the starter washer.


c.
A175304

Remove the 3 starter planetary gears.


d.
A175305

Remove the starter internal gear.


Hide 28110 6.REMOVE STARTER DRIVE HOUSING ASSEMBLY

a.
A175306

Remove the 2 bolts and starter drive housing from the magnet starter switch.


Hide 28011 7.REMOVE STARTER CLUTCH SUB-ASSEMBLY

a.
A163094

Using snap ring pliers, remove the snap ring.


b.

Remove the pinion drive lever and 3 washers.


c.

Remove the starter clutch from the magnet starter switch.