Home › Engine / Hybrid System › CRUISE CONTROL › CLUTCH SWITCH(for RHD)
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255247 CLUTCH SWITCH(for RHD) A

CRUISE CONTROL  CLUTCH SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 88280A 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.
B181123

Install the clutch switch assembly and tighten the adjusting nut.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


b.
B186775E01
0.07,0.358 1.001,0.570 0.931,0.212 10 Adjusting Nut 0.329,0.972 1.164,1.166 0.835,0.194 10 Cushion 1.59,0.97 1.277,0.443 1.277,0.443 1.105,0.443 false 1.524,1.275 1.275,1.068 1.275,1.068 0.998,1.068 false

Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)

NOTICE:

After adjusting the pedal free play, perform the clutch switch assembly adjustment (See page Drivetrain>CLUTCH>CLUTCH PEDAL(for RHD)>ADJUSTMENT).



Hide 55105D 2.INSTALL CLUTCH PEDAL BRACKET SUB-ASSEMBLY

a.

Install the clutch pedal bracket sub-assembly (See page Drivetrain>CLUTCH>CLUTCH PEDAL(for RHD)>REMOVAL).