Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255248 CRUISE CONTROL MAIN SWITCH A

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for LHD and RHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 84632 1.INSTALL CRUISE CONTROL MAIN SWITCH

a.

Connect the connector to install the cruise control main switch wire.


b.

Install the cruise control main switch with the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 22 in.*lbf)


c.

Connect the connector.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).