84632
1.INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY
for vehicles without vehicle-to-vehicle distance control mode:
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (Cruise Control Main Switch) | - | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (ECC) - 3 (CSS) | Cruise control switch (ON/OFF button) released | 1 MΩ or higher |
| Cruise control switch (ON/OFF button) pushed | Below 2.5 Ω | |
| +/RES | 235 to 245 Ω | |
| -/SET | 617 to 643 Ω | |
| CANCEL | 1509 to 1571 Ω |
If the result is not as specified, replace the cruise control main switch assembly.
for vehicles with vehicle-to-vehicle distance control mode:
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (Cruise Control Main Switch) | - | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (ECC) - 3 (CSS) | Cruise control switch (ON/OFF button) released | 1 MΩ or higher |
| Cruise control switch (ON/OFF button) pushed | Below 2.5 Ω | |
| +/RES | 235 to 245 Ω | |
| -/SET | 617 to 643 Ω | |
| CANCEL | 1509 to 1571 Ω |
If the result is not as specified, replace the cruise control main switch assembly.