Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255251 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  DIAGNOSIS SYSTEM  


DIAGNOSIS FUNCTION


a.
E247331E01
0.531,0.208 0.692,0.350 0.161,0.142 10 *1 2.044,0.208 2.204,0.350 0.161,0.142 10 *2 0.594,2.382 0.755,2.524 0.161,0.142 10 *3 2.244,2.511 2.405,2.653 0.161,0.142 10 *4

The diagnosis function makes the master warning light and the multi-information display come on, and the cruise control indicator light goes off as shown in the illustration. When a malfunction occurs in the dynamic radar cruise control system, DTCs are stored in the ECM.

Text in Illustration
*1 Master Warning Light
*2 Cruise Control Indicator Light (Constant Speed Control Mode)
*3 Multi-information Display
*4 Cruise Control Indicator Light (Vehicle-to-vehicle Distance Control Mode)

NOTICE:
·

The master warning light goes off if the system returns to normal.

·

Since the stored data in the ECM is cleared by disconnecting the EFI and ETCS fuses or the cable from the negative (-) battery terminal, do not disconnect them until the inspection has been completed.





CHECK INDICATOR


a.
E247334E01
2.05,0.193 2.229,0.345 0.179,0.151 10 *1 0.995,2.388 1.175,2.539 0.179,0.151 10 *2

Turn the engine switch on (IG).


b.

Check that the cruise control indicator light and RADAR READY indicator come on when the cruise control main switch ON-OFF button is pushed on, and that the indicator light goes off when the ON-OFF button is pushed off.

Text in Illustration
*1 Cruise Control Indicator Light (Vehicle-to-vehicle Distance Control Mode)
*2 Multi-information Display

HINT:
·

If the indicator check result shows a problem, proceed to troubleshooting for the combination meter section.

·

If a malfunction occurs in the vehicle speed sensors, the stop light switch, or other related parts during cruise control driving, the ECU activates AUTO CANCEL of cruise control and turns off the cruise control indicator light. At the same time, the malfunction is stored as a diagnostic trouble code.