Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255251 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  OPERATION CHECK  


INPUT SIGNAL CHECK


a.
E321748

Connect the GTS to the DLC3.


b.

Check the cruise control main switch using the Data List function of the GTS (ON/OFF, -/SET, +/RES and CANCEL).



INSPECT MODE SWITCH


a.
E321749

Turn the engine switch on (IG).


b.

Push and hold the switch of the cruise control main switch (ON/OFF) for 1.5 seconds or more with the dynamic radar cruise control system off to change to the constant speed control mode.


c.
E224649E01
1.195,0.821 1.346,0.968 0.151,0.147 10 *1 1.195,2.654 1.346,2.802 0.151,0.147 10 *2

Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

Text in Illustration
*1 Cruise Control Indicator
(Vehicle-to-vehicle Distance Control Mode)
*2 Cruise Control Indicator
(Constant Speed Control Mode)

HINT:

If a malfunction is detected, turn the engine switch off and repeat the procedure above.




INSPECT STEERING PAD SWITCH ASSEMBLY


a.

Turn the engine switch on (IG).


b.

Turn the dynamic radar cruise control system on using the cruise control main switch (ON/OFF).


c.
C338525E01
1.752,1.166 2.499,1.912 2.499,1.912 2.652,1.912 false 2.693,1.81 3.014,1.977 0.320,0.167 10 *1

Press the vehicle-to-vehicle distance control switch of the steering pad switch assembly.

Text in Illustration
*1 Vehicle-to-vehicle Distance Control Switch


d.

Check that the indication of the vehicle-to-vehicle distance, which is shown on the multi-information display (combination meter assembly), changes from long to middle to short in that order.

HINT:

Long is automatically selected each time the engine switch is turned on (IG).