Home › Engine / Hybrid System › CRUISE CONTROL › DISTANCE CONTROL ECU › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255252 DISTANCE CONTROL ECU D

CRUISE CONTROL  DISTANCE CONTROL ECU  INITIALIZATION  


NOTICE:

After removing and installing or replacing the distance control ECU, be sure to perform the following procedures.


INITIALIZE DISTANCE CONTROL ECU


a.

Turn the engine switch on (IG).


b.

Turn the cruise control main switch on.


c.

Depress the brake pedal (brake switch on).


d.

With the brake pedal depressed, push the cruise control main switch to +RES 3 times within 3 seconds, and check that the buzzer sounds.

NOTICE:

At this time, do not turn the headlight dimmer switch on. Due to the activation of the beam axis automatic adjustment mode, turning the headlight dimmer switch on may result in an incorrect setting. If the headlight dimmer switch is turned on by mistake, perform the beam axis adjustment again.