Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255253 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not damage the millimeter wave radar sensor assembly.

·

If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.



PROCEDURE

Hide 88215 1.INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET

a.
B437838E05
1.885,0.719 1.885,0.219 1.885,0.219 2.375,0.219 true 2.823,1.896 2.438,1.896 2.438,1.896 2.438,1.25 true 1.875,0.885 2.073,1.083 0.198,0.198 10 true 1 2.594,1.135 2.792,1.333 0.198,0.198 10 true 2 2.438,0.115 2.656,0.375 0.219,0.26 10 true *a 2.875,1.813 3.094,2.052 0.219,0.24 10 true *b

Install a new No. 1 millimeter wave radar sensor bracket with the 2 screws.

HINT:

Tighten the screws in the order indicated in the illustration.


Torque:
for Screw A : 2.0 N*m (20 kgf*cm, 18 in.*lbf)
for Screw B : 0.8 N*m (8 kgf*cm, 7 in.*lbf)

Text in Illustration
*a Screw A
*b Screw B