Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255254 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  SYSTEM DESCRIPTION  


ROAD SIGN ASSIST SYSTEM DESCRIPTION


a.

The road sign assist system uses the forward recognition camera to recognize traffic signs and provides information to the driver on the multi-information display.



ROAD SIGN ASSIST SYSTEM CONTROL


a.

Control Pattern 1:

A352225E02
1.22,1.716 1.432,1.916 0.211,0.200 10 *a 1.866,1.305 2.077,1.506 0.211,0.200 10 *b 4.34,0.619 4.552,0.819 0.211,0.200 10 *c 2.354,1.462 2.565,1.662 0.211,0.200 10 *a 3.422,1.462 3.633,1.662 0.211,0.200 10 *a 4.496,1.462 4.707,1.662 0.211,0.200 10 *a 5.575,1.462 5.786,1.662 0.211,0.200 10 *a 6.945,1.716 7.156,1.916 0.211,0.200 10 *a

Text in Illustration
*a Multi-information Display *b Traffic Sign
*c Distance - -

After a sign is recognized by the forward recognition camera and the vehicle passes by, the sign is displayed on the multi-information display. If no new signs are recognized while a sign is displayed, the system assesses the reliability of the currently displayed sign and clears the display.


b.

Control Pattern 2:

A352226E02
0.933,0.527 1.149,0.712 0.216,0.184 10 *a 3.787,0.527 4.003,0.712 0.216,0.184 10 *b 2.876,1.588 3.092,1.772 0.216,0.184 10 *c 5.838,1.588 6.054,1.772 0.216,0.184 10 *c

Text in Illustration
*a Engine Switch off *b Engine Switch on (IG)
*c Multi-information Display - -

If a speed limit sign was displayed when the previous trip ended, when the engine switch is turned on (IG), the same sign is displayed again.


c.

Control Pattern 3:

A352227E02
4.513,1.548 4.714,1.736 0.202,0.188 10 *a 2.888,1.74 3.090,1.928 0.202,0.188 10 *b 2.601,0.041 2.803,0.229 0.202,0.188 10 *a

Text in Illustration
*a Multi-information Display *b Traffic Sign

While a sign is displayed, if the currently traveled road changes due to a left or right turn, etc., the displayed sign is cleared.



DISPLAY SPECIFICATIONS


a.

Road signs recognized by the forward recognition camera are divided into the following categories and displayed on the multi-information display.

Supported Road Sign Multi-information Display Notification Function Operation
Category Type Multi-information Display Buzzer
Speed Limit Maximum speed limit/End of speed limit
A352231

A352595

Excess speed notification
(Display inverts)
Sounds*1
No Overtaking No overtaking/End of no overtaking
A352232

A352596

No overtaking notification
(Blinks)
Sounds*1
End of prohibition
A352233

- -
Supplemental Signs (display simultaneously with speed limit) Wet
A352234

- -
Rain
A352235

- -
Ice
A352236

- -
Time restriction
A361707

- -
Ramp way*2
A352238

- -
Blank*3
A352237

- -

*1: Through the customization settings, the buzzer can be made to sound during warnings. However, a buzzer warning will not occur when exceeding the speed limit with a supplemental sign present.

*2: This sign is not displayed when performing a lane change without operating the turn signal.

*3: The display is blank when the system is unable to recognize a meaning of supplemental sign.



b.

The display format for signs displayed on the multi-information display can be changed using the steering pad switch assembly.