Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255254 ROAD SIGN ASSIST SYSTEM A

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the Multi-information display

i.

Turn the engine switch on (IG).


ii.

Enter the following menus: Settings Tab.


iii.

Select the setting by referring to the table below.

Settings Tab
Display Default Content Setting Relevant ECU
RSA ON/OFF ON System ON/OFF setting ON or OFF forward recognition camera


iv.

Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup


v.

Select the setting by referring to the table below.

Road Sign Assist Setup
Display Default Content Setting Relevant ECU
Excess Speed Only Visual Speed limit exceeded notification method setting No Notification, Only Visual or Visual and Audible forward recognition camera
Notification Level 2 km/h (1 mph) Speed limit exceeded notification level setting* 10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph) forward recognition camera
Other Notifications Only Visual No overtaking notification method setting No Notification, Only Visual or Visual and Audible forward recognition camera

*: When the speed unit settings of the meter are changed, the displayed unit also changes.