Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255255 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  TERMINALS OF ECU  


CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the R20 forward recognition camera connector.



a.

CHECK FORWARD RECOGNITION CAMERA

U166392E02
2.083,0.781 2.448,0.958 0.365,0.177 10 false R20

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
R20-7 (IGB) - Body ground B - Body ground Power source Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
R20-10 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω
R20-5 (CA1P) - Body ground G - Body ground CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
R20-11 (CA1N) - Body ground B - Body ground CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)
R20-6 (CANH) - Body ground R - Body ground CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
R20-12 (CANL) - Body ground P - Body ground CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)


b.
E349639E01
2.656,0.313 3.208,0.479 0.552,0.167 10 false 1 V/DIV. 1.302,1.76 2.385,1.99 1.083,0.229 10 false 10 μsec./DIV. 2.833,1.333 3.281,1.51 0.448,0.177 10 false GND

WAVEFORM 1

i.

CAN communication signal

Item Content
Terminal Name Between R20-5 (CA1P) and R20-10 (GND)
Between R20-6 (CANH) and R20-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




c.
E349640E01
2.667,0.365 3.365,0.573 0.698,0.208 10 false 1 V/DIV. 1.333,1.833 2.563,2.031 1.229,0.198 10 false 10 μsec./DIV. 2.875,1.354 3.24,1.542 0.365,0.188 10 false GND

WAVEFORM 2

i.

CAN communication signal

Item Content
Terminal Name Between R20-11 (CA1N) and R20-10 (GND)
Between R20-12 (CANL) and R20-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.





DRIVING SUPPORT ECU ASSEMBLY


a.

CHECK DRIVING SUPPORT ECU ASSEMBLY

U166506E02
3.344,0.156 3.708,0.333 0.365,0.177 10 false E164

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E164-7 (B) - E164-28 (GND) P - BR Power source Engine switch on (IG) 11 to 14 V
E164-8 (CA1P) - E164-28 (GND) W - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
E164-9 (CA1N) - E164-28 (GND) P - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)
E164-10 (CA2H) - E164-28 (GND) L - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
E164-11 (CA2L) - E164-28 (GND) B - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)
E164-23 (SPSW) - E164-28 (GND) W - BR Steering pad switch signal (lane departure alert main switch signal) Engine switch off, lane departure alert main switch off 10 kΩ or higher
E164-23 (SPSW) - E164-28 (GND) W - BR Steering pad switch signal (lane departure alert main switch signal) Engine switch off, lane departure alert main switch on 235.2 to 244.8 Ω
E164-28 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω


b.
E349639E01
2.656,0.313 3.208,0.479 0.552,0.167 10 false 1 V/DIV. 1.302,1.76 2.385,1.99 1.083,0.229 10 false 10 μsec./DIV. 2.833,1.333 3.281,1.51 0.448,0.177 10 false GND

WAVEFORM 1

i.

CAN communication signal

Item Content
Terminal Name Between E164-8 (CA1P) and E164-28 (GND)
Between E164-10 (CA2H) and E164-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




c.
E349640E01
2.667,0.365 3.365,0.573 0.698,0.208 10 false 1 V/DIV. 1.333,1.833 2.563,2.031 1.229,0.198 10 false 10 μsec./DIV. 2.875,1.354 3.24,1.542 0.365,0.188 10 false GND

WAVEFORM 2

i.

CAN communication signal

Item Content
Terminal Name Between E164-9 (CA1N) and E164-28 (GND)
Between E164-11 (CA2L) and E164-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.