Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255255 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  FREEZE FRAME DATA  


DESCRIPTION


a.

Whenever a lane departure alert system is stored, the forward recognition camera stores the current vehicle state (ECU and sensor information) as Freeze Frame Data.



CHECK FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / LKA/LDA / Trouble Codes.


e.

Select a DTC to display the freeze frame data.


f.

Check the freeze frame data for the output DTC.



LIST OF FREEZE FRAME DATA


LKA/LDA
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
LDA Control Control status of lane departure alert system /
Prohibit or Permit
Prohibit: Control prohibited
Permit: Control permitted
-
Turn Signal Switch (Right) Status of turn signal light switch (right)/
OFF or ON
ON: Turn signal light switch on (right)
OFF: Turn signal light switch off
-
Turn Signal Switch (Left) Status of turn signal light switch (left)/
OFF or ON
ON: Turn signal light switch on (left)
OFF: Turn signal light switch off
-
Left Lane Indicator Left lane marker detection status/
Nothing, Heavy, Thin or H blink
Nothing: Lane departure alert system deactivated
Heavy: Left lane detected
Thin: Left lane not detected
H blink: Departing from left lane
-
Right Lane Indicator Right lane marker detection status/
Nothing, Heavy, Thin or H blink
Nothing: Lane departure alert system deactivated
Heavy: Right lane detected
Thin: Right lane not detected
H blink: Departing from right lane
-
Skid Control Buzzer Demand LDA Buzzer Demand Status/
OFF or ON
OFF: LDA buzzer not operating
ON: LDA buzzer operating
-
The Number of DTCs Number of stored DTCs/
min.: 0, max.: 255
Actual number of DTCs -