Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255255 LANE DEPARTURE ALERT SYSTEM A

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE LANE DEPARTURE ALERT SYSTEM

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the Multi-information display

i.

Turn the engine switch on (IG).


ii.

Enter the following menus: Setup / Vehicle


iii.

Select the setting by referring to the table below.

Display Default Content Setting Relevant ECU
Sensitivity Normal Change LDA Sensitivity Normal/High Forward recognition camera
Sway Warning On Lane Sway Warning Status On/Off Forward recognition camera
Sway Sensitivity Normal Sway Warning Sensitivity Low/Normal/High Forward recognition camera