Home › Engine / Hybrid System › CRUISE CONTROL › FORWARD RECOGNITION CAMERA SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255256 FORWARD RECOGNITION CAMERA SYSTEM U

CRUISE CONTROL  FORWARD RECOGNITION CAMERA SYSTEM  TERMINALS OF ECU  


FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the R20 forward recognition camera connector.



U166391E02
2.073,0.792 2.438,0.969 0.365,0.177 10 false R20

a.

CHECK FORWARD RECOGNITION CAMERA

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*: w/ Camera Heater

R20-1 (HTR) - Body ground* V - Body ground Forward recognition with heater hood sub-assembly operation signal Engine switch on (IG), and the forward recognition with heater hood sub-assembly operating Below 1 V
Engine switch on (IG), and the forward recognition with heater hood sub-assembly not operating 11 to 14 V
R20-7 (IGB) - Body ground B - Body ground Power source Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
R20-10 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω
R20-5 (CA1P) - R20-10 (GND) G - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
R20-11 (CA1N) - R20-10 (GND) B - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)
R20-6 (CANH) - R20-10 (GND) R - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
R20-12 (CANL) - R20-10 (GND) P - BR CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)


b.
E349639E01
2.656,0.313 3.208,0.479 0.552,0.167 10 false 1 V/DIV. 1.302,1.76 2.385,1.99 1.083,0.229 10 false 10 μsec./DIV. 2.833,1.333 3.281,1.51 0.448,0.177 10 false GND

WAVEFORM 1

i.

CAN communication signal

Item Content
Terminal Name Between R20-5 (CA1P) and R20-10 (GND)
Between R20-6 (CANH) and R20-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




c.
E349640E01
2.667,0.365 3.365,0.573 0.698,0.208 10 false 1 V/DIV. 1.333,1.833 2.563,2.031 1.229,0.198 10 false 10 μsec./DIV. 2.875,1.354 3.24,1.542 0.365,0.188 10 false GND

WAVEFORM 2

i.

CAN communication signal

Item Content
Terminal Name Between R20-11 (CA1N) and R20-10 (GND)
Between R20-12 (CANL) and R20-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.