Home › Engine / Hybrid System › CRUISE CONTROL › FORWARD RECOGNITION CAMERA SYSTEM › from 2015.08
RM2660E _51 Engine / Hybrid System _052804 CRUISE CONTROL _0255256 FORWARD RECOGNITION CAMERA SYSTEM D

CRUISE CONTROL  FORWARD RECOGNITION CAMERA SYSTEM  UTILITY  


NOTICE:
·

If the forward recognition camera has been replaced or removed/installed, perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust. If not performed, DTC C1AA9 will be stored when the system is turned on.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the forward recognition camera system may not operate properly due to a difference in the transmissivity or black ceramic border.



Recognition Camera/Target Position Memory


a.

Perform Recognition Camera Axis Adjust according to the display on the GTS (See page Engine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT).

HINT:

Before performing "Recognition Camera Axis Adjust", store the recognition camera position information, target position information and vehicle information in the forward recognition camera.




Recognition Camera Axis Adjust


a.

Perform Recognition Camera Axis Adjust according to the display on the GTS (See page Engine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT).

HINT:

After performing the "Recognition Camera/Target Position Memory", further calibrate the stored data.




History Clear


HINT:

If any history DTCs for the forward recognition camera are stored, clear them according to the following procedure.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Utility / History Clear.


e.

Perform History Clear according to the display on the GTS.



PCS Image Information Clear


HINT:

PCS Image Information Clear is used to clear the PCS Image Information data.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Utility / PCS Image Information Clear.


e.

Perform PCS Image Information Clear according to the display on the GTS.



PCS Image Record Setting


HINT:

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Utility / PCS Image Record Setting.


e.

Perform PCS Image Record Setting according to the display on the GTS.