Home › Drivetrain › AB60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL PUMP
RM2660E _52 Drivetrain _052805 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0255264 OIL PUMP A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 35301A 1.INSTALL FRONT OIL PUMP OIL SEAL

C161807E01
1.994,0.822 2.296,1.006 0.302,0.185 10 SST 1.959,0.942 1.683,1.003 false

a.

Using SST and a hammer, tap in a new oil seal.

SST
09950-60010  (09951-00650)
09950-70010  (09951-07100)

HINT:

The oil seal end should be flush with the outer edge of the pump body.



b.

Coat the lip of the oil seal with MP grease.


Hide 35301 2.FIX FRONT OIL PUMP BODY SUB-ASSEMBLY

a.

Place the oil pump body on the torque converter clutch.


Hide 35322 3.INSTALL FRONT OIL PUMP DRIVEN GEAR

C161799

a.

Coat the driven gear with ATF.


b.

Install the driven gear to the oil pump body.


Hide 35321 4.INSTALL FRONT OIL PUMP DRIVE GEAR

C161798

a.

Coat the drive gear with ATF.


b.

Install the drive gear to the oil pump body.


Hide 35301B 5.INSTALL FRONT OIL PUMP BODY O-RING

C161797E01
0.475,0.121 1.302,0.313 0.827,0.192 10 New O-Ring 1.851,0.439 1.461,0.273 false

a.

Coat a new O-ring with ATF and install it to the oil pump body.


Hide 35370 6.INSTALL STATOR SHAFT ASSEMBLY

U152329

a.

Align the stator shaft with the bolt holes.


b.

Install the 17 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 35617 7.INSTALL CLUTCH DRUM OIL SEAL RING

C161795E06
1.5,0.427 0.958,0.729 false 2.01,0.24 2.292,0.438 0.281,0.198 10 true x 3 0.073,0.75 1.302,0.99 1.229,0.24 10 true New Oil Seal Ring

a.

Coat 3 new oil seal rings with ATF.


b.

Squeeze the ends of the 3 oil seal rings together so that the overlap distance is 8 mm (0.314 in.) or less, and then install them to the starter shaft groove.

NOTICE:

Do not excessively widen the rings.


HINT:

After installing the oil seal rings, check that they rotate smoothly.



Hide 35111Y 9.INSTALL AUTOMATIC TRANSMISSION CASE O-RING

C162762E01
0.592,0.036 1.441,0.287 0.849,0.250 10 New O-Ring 1.916,0.353 1.594,0.187 false

a.

Coat a new O-ring with ATF and install it to the oil pump.