1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.
Connect the 2 connectors.
33702B
2.CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.
Move the shift lever to N.
Temporarily install the floor shift gear shifting rod with the nut.
Tighten the nut while lightly pushing the lever rearward.
3.INSTALL FRONT CONSOLE BOX