35251
1.INSTALL CHECK BALL BODY
Install the spring and check ball body.
| *1 | Check Ball Body |
| *2 | Spring |
35410
2.INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Insert the pin of the manual valve into the hole of the manual valve lever.
| *1 | Pin |
Install the 19 bolts.
Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
Install the detent spring and detent spring cover with the bolt.
82125J
3.CONNECT TRANSMISSION WIRE
4.RESET MEMORY