Home › Drivetrain › AB60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › COMBINATION SWITCH(w/ Entry and Start System) › from 2015.08
RM2660E _52 Drivetrain _052805 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0255276 COMBINATION SWITCH(w/ Entry and Start System) G

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  COMBINATION SWITCH(w/ Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84010D 1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Active Height Control)

a.
C331266E01
0.062,0 0.260,0.198 0.198,0.198 10 *a 0.286,0.599 0.429,0.785 0.143,0.185 10 E 1.225,1.051 0.662,0.681 0.662,0.681 0.447,0.681 false 2.835,1.669 2.978,1.854 0.143,0.185 10 P 2.212,1.367 2.603,1.75 2.603,1.75 2.801,1.75 false 0.802,1.759 1.081,1.948 0.279,0.189 10 2nd 1.716,1.394 1.325,1.855 1.325,1.855 1.128,1.855 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Switch Condition Specified Condition
5 (E) - 6 (P) Mode switch
(ECT PWR) on
Below 1 Ω
Release mode switch
(ECT PWR) off
10 kΩ or higher
5 (E) - 8 (2nd) Mode switch being pushed and held
(ECT 2nd)
Below 1 Ω
Mode switch not pushed
(ECT 2nd)
10 kΩ or higher

Text in Illustration
*a Component without harness connected
(Integration Control and Panel Assembly)

If the result is not as specified, replace the integration control and panel assembly.


Hide 84010D 2.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (w/ Active Height Control)

a.
C331266E27
1.229,1.094 0.667,0.729 0.667,0.729 0.448,0.729 false 2.208,1.375 2.604,1.75 2.604,1.75 2.802,1.75 false 2.719,0.427 2.5,0.427 2.5,0.427 1.948,1.094 false 1.719,1.083 1.333,0.344 1.333,0.344 1.115,0.344 false 0.083,0.052 0.281,0.25 0.198,0.198 10 false *a 0.26,0.656 0.406,0.844 0.146,0.188 10 false E 2.833,1.677 2.979,1.865 0.146,0.188 10 false P 2.75,0.333 2.885,0.521 0.135,0.188 10 false B 0.74,0.271 1.083,0.458 0.344,0.188 10 false ECU

Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Switch Condition Specified Condition
5 (E) - 6 (P) Mode switch being pushed and held
(SPORTS S/S+)
Below 1 Ω
Mode switch not pushed
(SPORTS S/S+)
10 kΩ or higher
5 (E) - 2 (B) Mode switch being pushed and held
(NORMAL)
Below 1 Ω
Mode switch not pushed
(NORMAL)
10 kΩ or higher
5 (E) - 3 (ECU) Mode switch being pushed and held
(COMF/ECO)
Below 1 Ω
Mode switch not pushed
(COMF/ECO)
10 kΩ or higher

Text in Illustration
*a Component without harness connected
(Integration Control and Panel Assembly)

If the result is not as specified, replace the integration control and panel assembly.