Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION WIRE › 2014.08–2015.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255281 TRANSMISSION WIRE A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  INSTALLATION  


PROCEDURE

Hide 82125J 1.INSTALL TRANSMISSION WIRE

a.

Coat the O-ring of the transmission wire connector with ATF.


b.
C125286

Install the transmission wire with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.
C155913

Connect the transmission wire connector.

HINT:

Push up the lever until the claw of the transmission wire connector makes a connection sound.



Hide 82125J 2.CONNECT TRANSMISSION WIRE

a.
C125285E09
1.146,1.552 1.552,1.406 false 0.771,0.729 1.073,0.844 false 1.146,1.115 1.833,0.656 false 0.438,1.208 1.052,1.292 false 1.719,0.448 2.292,0.719 0.573,0.271 10 true Orange 0.104,1.115 0.531,1.313 0.427,0.198 10 true Blue 0.635,0.625 0.844,0.823 0.208,0.198 10 true A 1.573,1.302 1.74,1.521 0.167,0.219 10 true B

Connect the 7 connectors to the solenoid valves.


b.

Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

Torque:
for bolt A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for bolt B : 11 N*m (112 kgf*cm, 8 ft.*lbf)

HINT:

Each bolt length is indicated below.

12 mm (0.472 in.) for bolt A


36 mm (1.42 in.) for bolt B


Hide 35330 3.INSTALL VALVE BODY OIL STRAINER ASSEMBLY

D028692

a.

Coat a new O-ring with ATF and install it to the oil strainer.


b.

Install the oil strainer with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 35106 4.INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

U148188

NOTICE:

Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.


a.

Install a new gasket and the oil pan with the 20 bolts.

Torque:
4.4 N*m (45 kgf*cm, 39 in.*lbf)


Hide 5.ADD AUTOMATIC TRANSMISSION FLUID