Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › 2014.08–2017.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255282 PARK / NEUTRAL POSITION SWITCH A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 33702B 1.DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C170828

a.

Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Disconnect the switch connector.


b.
C170829

Remove the nut, spring washer and transmission control shaft lever RH.


c.

Remove the collar and transmission control rod bush from the transmission control shaft lever RH.


d.
C155870

Using a screwdriver, bend the tabs of the lock washer.


e.
C155871

Remove the lock nut and lock washer.


f.
C155872

Remove the bolt and switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.