Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › 2014.08–2015.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255289 SHIFT LEVER A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

U164684

Hide 35906 2.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

U153439E01
0.239,0.026 2.718,0.411 2.479,0.384 10 Component without harness connected: (Transmission Control Switch) 0.782,0.798 1.119,0.986 0.337,0.188 10 ILL+ 0.782,1.816 1.090,1.999 0.308,0.183 10 ILL- 1.519,1.273 1.153,0.992 false 1.519,1.565 1.153,1.846 false 0.144,2.476 2.001,2.667 1.857,0.191 10 Connector Housing Retainer 2.563,3.157 2.516,2.597 2.516,2.597 2.379,2.597 false

a.

Using a thin-bladed screwdriver, release the connector housing retainer.


b.

Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.


c.
U164651

Rotate the indicator light wire counterclockwise to align the key part and remove the wire.


Hide 35970F 3.REMOVE POSITION INDICATOR HOUSING ASSEMBLY

C171524

a.

Detach the 4 claws and remove the position indicator housing from the floor shift.


Hide 35952 4.REMOVE POSITION INDICATOR LENS

C172418

a.

Detach the 4 claws and remove the position indicator lens from the floor shift.


Hide 35975 5.REMOVE POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER

C172423

a.

Remove the position indicator slide cover with No. 2 position indicator slide cover.


b.

Remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 33563 6.REMOVE SHIFT LOCK RELEASE BUTTON

C172424

a.

Detach the 2 claws and remove the button and spring.


Hide 35974 7.REMOVE LOWER POSITION INDICATOR HOUSING

C171528

a.

Using a small screwdriver, detach the 6 claws and remove the housing.


Hide 85903 8.REMOVE SHIFT LOCK CONTROL ECU

C171529

a.

Disconnect the shift lock solenoid connector.


b.

Detach the 3 claws and remove the ECU.