Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › 2014.08–2015.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255289 SHIFT LEVER A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


PROCEDURE

Hide 85903 1.INSTALL SHIFT LOCK CONTROL ECU

C171529

a.

Attach the 3 claws to install the ECU to the floor shift.


b.

Connect the shift lock solenoid connector.


Hide 35974 2.INSTALL LOWER POSITION INDICATOR HOUSING

C172426

a.

Attach the 6 claws to install the housing.


Hide 33563 3.INSTALL SHIFT LOCK RELEASE BUTTON

C172424

a.

Attach the 2 claws to install the spring and button.


Hide 35975 4.INSTALL POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER

U164686E02
2.167,0.271 2.854,0.219 false 2.927,0.146 3.302,0.344 0.375,0.198 10 false Mark

a.

Install the No. 2 position indicator slide cover to the position indicator slide cover.


b.

Install the position indicator slide cover together with the No. 2 position indicator slide cover.

HINT:

Install the position indicator slide cover so that its mark faces the vehicle front.



Hide 35952 5.INSTALL POSITION INDICATOR LENS

C172418

a.

Attach the 4 claws to install the position indicator lens.


Hide 35970F 6.INSTALL POSITION INDICATOR HOUSING ASSEMBLY

C171524

a.

Attach the 4 claws to install the position indicator housing.


Hide 35906 7.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

U164652

a.

Align the wire with the key part of the lower position indicator housing, and install the wire. Then rotate the wire clockwise until it locks.


b.
U153572E03
1.5,1.292 1.135,1.01 false 1.49,1.563 1.125,1.844 false 2.583,3.146 2.906,2.573 2.906,2.573 2.771,2.573 false 0.24,0.104 2.719,0.49 2.479,0.385 10 false Component without harness connected: (Transmission Control Switch) 0.813,0.906 1.146,1.094 0.333,0.188 10 false ILL+ 0.875,1.813 1.188,2 0.313,0.188 10 false ILL- 1,2.49 2.854,2.677 1.854,0.188 10 false Connector Housing Retainer

Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.


c.
C172425

Check the shift lock solenoid and indicator light wire harness as shown in the illustration.


Hide 33504F 8.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

U164685

Torque:
3 to 5 N*m (31 to 51 kgf*cm, 27 to 44 in.*lbf)