Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › COMBINATION SWITCH › 2015.08–2017.08
RM2660E _52 Drivetrain _052806 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0255291 COMBINATION SWITCH G

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  COMBINATION SWITCH  INSPECTION  


PROCEDURE

Hide 84010D 1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY

a.
C331266E23
1.219,1.115 0.656,0.74 0.656,0.74 0.438,0.74 false 2.208,1.438 2.604,1.823 2.604,1.823 2.802,1.823 false 1.708,1.458 1.313,1.917 1.313,1.917 1.115,1.917 false 0.063,0 0.26,0.198 0.198,0.198 10 false *a 0.271,0.667 0.417,0.854 0.146,0.188 10 false E 2.885,1.75 3.031,1.938 0.146,0.188 10 false P 0.844,1.833 1.125,2.021 0.281,0.188 10 false 2nd

Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Switch Condition Specified Condition
5 (E) - 6 (P) Mode switch
(ECT PWR) on
Below 1 Ω
Release mode switch
(ECT PWR) off
10 kΩ or higher
5 (E) - 8 (2nd) Mode switch being pushed and held
(ECT 2nd)
Below 1 Ω
Mode switch not pushed
(ECT 2nd)
10 kΩ or higher

Text in Illustration
*a Component without harness connected
(Integration Control and Panel Assembly)

If the result is not as specified, replace the integration control and panel assembly.