82125J
1.INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | ATF Temperature | Specified Condition |
|---|---|---|
| 1 (OT+) - Body ground | Always | 10 kΩ or higher |
| 2 (OT-) - Body ground | Always | 10 kΩ or higher |
| *a | Component without harness connected
(Transmission Wire (ATF Temperature Sensor)) |
If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.
| Tester Connection | ATF Temperature | Specified Condition |
|---|---|---|
| 1 (OT+) - 2 (OT-) | 10°C (50°F) | 6.445 kΩ |
| 25°C (77°F) | 3.5 kΩ | |
| 110°C (230°F) | 0.247 kΩ |
If the result is not as specified, replace the transmission wire (ATF temperature sensor).