Home › Drivetrain › AE80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL PUMP › from 2015.08
RM2660E _52 Drivetrain _052807 AE80F AUTOMATIC TRANSMISSION / TRANSAXLE _0255304 OIL PUMP A

AE80F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 35301A 1.INSTALL FRONT OIL PUMP OIL SEAL

a.
C336444E01
0.475,0.246 0.788,0.404 0.313,0.158 10 SST 1.569,0.776 0.974,0.332 0.974,0.332 0.854,0.332 false

Using SST and a hammer, tap in a new front oil pump oil seal.

SST
09350-30020  (09351-32140)

Standard depth:

-0.2 to 0.2 mm (-0.00787 to 0.00787 in.)


HINT:

The front oil pump oil seal end should be flush with the outer edge of the front oil pump body sub-assembly.



b.

Coat the lip of the front oil pump oil seal with MP grease.


Hide 35301 2.FIX FRONT OIL PUMP BODY SUB-ASSEMBLY

a.

Place the front oil pump body sub-assembly on the torque converter assembly.


Hide 35322 3.INSTALL FRONT OIL PUMP DRIVEN GEAR

a.
C336435

Coat the front oil pump driven gear with ATF.


b.

Install the front oil pump driven gear to the front oil pump body sub-assembly.


Hide 35321 4.INSTALL FRONT OIL PUMP DRIVE GEAR

a.
C336434

Coat the front oil pump drive gear with ATF.


b.

Install the front oil pump drive gear to the front oil pump body sub-assembly.


Hide 35301B 5.INSTALL FRONT OIL PUMP BODY O-RING

a.
C336433

Coat a new front oil pump body O-ring with ATF.


b.

Install the front oil pump body O-ring to the front oil pump body sub-assembly.


Hide 35370 6.INSTALL STATOR SHAFT ASSEMBLY

a.
C336432

Align the stator shaft assembly with each bolt hole and install it.


b.

Using a T30 ''TORX'' socket wrench, install the 8 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 35616B 7.INSTALL CLUTCH DRUM THRUST WASHER

a.
C336430

Align the 2 claws and install the clutch drum thrust washer.


Hide 8.INSTALL NO. 1 BRAKE PISTON

a.
C329090E01
2.482,0.839 2.647,1.005 0.165,0.165 10 *1 2.143,1.235 2.392,0.942 2.392,0.942 2.48,0.942 false 2.699,1.358 2.864,1.524 0.165,0.165 10 *1 2.36,1.754 2.609,1.461 2.609,1.461 2.697,1.461 false

Coat 2 new O-rings with ATF and install them to the No. 1 brake piston.

Text in Illustration
*1 O-Ring


b.
C329089E01
2.535,2.088 2.707,2.247 0.172,0.159 10 *1 2.054,2.5 2.369,2.186 2.369,2.186 2.519,2.186 false 2.741,2.874 2.913,3.034 0.172,0.159 10 *2 2.261,3.287 2.575,2.972 2.575,2.972 2.726,2.972 false

Install the No. 1 brake piston and No. 1 brake piston return spring sub-assembly.

Text in Illustration
*1 No. 1 Brake Piston Return Spring Sub-assembly
*2 No. 1 Brake Piston


c.

Using a T30 ''TORX'' socket wrench, install the 5 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 35617 10.INSTALL CLUTCH DRUM OIL SEAL RING

a.

Coat 4 new clutch drum oil seal rings with ATF.


b.
C329088

Squeeze the ends of the 4 clutch drum oil seal rings so that the gap becomes 8 mm (0.32 in.) or less, and then install them to the stator shaft groove.

NOTICE:

Do not expand the ring ends excessively.


HINT:

After installing the clutch drum oil seal rings, check that they rotate smoothly.



Hide 35206B 11.INSTALL NO. 1 CHECK VALVE SUB-ASSEMBLY

a.

Install the No. 1 check valve sub-assembly and compression spring to the oil pump assembly.


b.

Install the check ball cover with the bolt.

Torque:
6.8 N*m (69 kgf*cm, 60 in.*lbf)


Hide 13.INSTALL OIL PUMP O-RING

a.
C329086

Install a new oil pump O-ring with ATF and install it to the oil pump assembly.