Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for RHD)
RM2660E _52 Drivetrain _052808 CLUTCH _0255313 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE CLUTCH RESERVOIR GROMMET

C173221

a.

Fix the master cylinder in a vise.


b.

Using a pin punch and hammer, tap out the slotted spring pin.


c.

Remove the inlet union and grommet.


Hide 31451 2.REMOVE CLUTCH MASTER CYLINDER PUSH ROD

C173220

a.

Loosen the lock nut, and then remove the clevis.


b.

Remove the lock nut from the push rod.


c.

Remove the boot.


d.

Using snap ring pliers, remove the snap ring and plate.


e.

Remove the push rod.


Hide 3.REMOVE PISTON AND SPRING

a.

Remove the piston and spring from the master cylinder.