Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM2660E _52 Drivetrain _052808 CLUTCH _0255314 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  REASSEMBLY  


PROCEDURE

Hide 31477 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the bleeder plug to the cylinder body.

Torque:
11 N*m (110 kgf*cm, 8 ft.*lbf)


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install 2 new cylinder cups onto a new piston.


b.

Install a new spring into the cylinder body.


c.
U165762E02
0.313,1.844 2.438,2.104 2.125,0.26 10 true Lithium soap base glycol grease

Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.


d.

Install the piston into the cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



e.

Install the push rod into the cylinder body.


f.

Install a new boot onto the cylinder body.