Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH(for RHD)
RM2660E _52 Drivetrain _052808 CLUTCH _0255319 CLUTCH PEDAL SWITCH(for RHD) G

CLUTCH  CLUTCH PEDAL SWITCH(for RHD)  INSPECTION  


PROCEDURE

Hide 84520 1.INSPECT CLUTCH START SWITCH ASSEMBLY

C175625E01
0.056,0.06 2.651,0.250 2.596,0.191 10 Component without harness connected: 1.439,3.195 2.798,3.552 1.359,0.357 10 On: 7.65 to 8.35 mm (0.302 to 0.328 in.) 0.132,3.896 1.582,4.216 1.450,0.320 10 Off: 1.65 to 2.35 mm (0.0650 to 0.0925 in.) 2.922,0.703 3.098,0.900 0.177,0.197 10 1 2.922,1.212 3.098,1.409 0.177,0.197 10 2 2.383,0.942 2.893,0.807 false 2.888,1.291 2.377,1.156 false 0.761,3.513 0.69,3.891 false

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 On (Pushed) Below 1 Ω
1 - 2 Off (Not pushed) 10 kΩ or higher


If the result is not as specified, replace the clutch start switch.