Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System) › 2015.08–2017.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255338 CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System) G

JF2A TRANSFER / 4WD / AWD  CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84725 1.INSPECT CENTER DIFFERENTIAL LOCK SWITCH

a.
C331297E02
2.576,1.664 2.718,1.844 0.142,0.180 10 E 0.71,1.664 1.063,1.844 0.354,0.180 10 CPU 2.205,1.341 2.437,1.753 2.437,1.753 2.554,1.753 false 1.48,1.341 1.248,1.753 1.248,1.753 1.131,1.753 false 0.054,0.003 0.237,0.159 0.184,0.156 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 (E) - 9 (CPU) Center differential lock switch being pushed and held Below 1 Ω
Center differential lock switch not pushed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Center Differential Lock Switch)

If the result is not as specified, replace the center differential lock switch.