84010D
1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Automatic Transmission)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 (2WD) - 7 (GND2) | H4 Position | 10 kΩ or higher |
| L4 Position | Below 1 Ω |
| *a | Component without harness connected
(Integration Control and Panel Assembly) |
If the result is not as specified, replace the integration control and panel assembly.
84223A
2.INSPECT TRANSFER POSITION SWITCH (for Manual Transmission)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 (2WD) - 7 (GND2) | H4 Position | 10 kΩ or higher |
| L4 Position | Below 1 Ω |
| *a | Component without harness connected
(Transfer Position Switch) |
If the result is not as specified, replace the transfer position switch.